COAXIAL Cable & CCTV Surge Protectors
The GATEKEEPER range of Coaxial Surge Protectors (GKCP) contain a high-speed gas filled surge arrestors which clamp the over voltage limiting the residual voltage for fast rise time transients. The use of low capacitance gas filled arrestors ensures operation at high frequencies with low insertion loss. The GKCP is available in either an inline or bulkhead configuration with the appropriate connectors on each end. The device is designed to minimise circuit capacitance and present a 50 or 75-ohm impedance so that performance up to 2.1 GHz is assured.
Coaxial Cable & CCTV Product Range
Please visit the Store to purchase online.
COAXIAL CABLE PROTECTORS, N-Type Connector
Please visit the Store to purchase online.
COAXIAL CABLE PROTECTORS, N-Type Connector
- LCPN90-12: N male/N female 0 - 90W
- LCPN90-22: N female/N female
- LCPN90-22B: N female/N female, bulkhead mount
- LCPN230-12: N male/N female 50 - 125W
- LCPN350-12: N male/N female 125 - 350W
- LCPN600-12B: N male/N female, 600W bulkhead mount
- LCPN1000-12: N male/N female 300 - 1000W
- LCPN90-22B AB: Angle Mounting Bracket - S/S
- GKCPF90-MFB: Male/Female 20KA 90V 75 ohm - Bulkhead
- LCPF90-22B: Female/Female 20KA 90V 75 ohm - Bulkhead
- RF-BNC-90: Male/Female 20KA 72-108V 50 ohm
- RF-BNC-350: Male/Female 20KA 280-420V 50 ohm
- RF-BNC-600: Male/Female 20KA 480-720V 50 ohm
- C75-BNC90: Male/Female 20KA 90V 75 ohm BNC-Type
- GKCCTVP-BNC-240: 240V protector for PTZ cameras - with indication
- GKCCTVP-BNC-24: 24V protector for PTZ cameras - with indication
- GKCCTVF-BNC-24: 24V protector for fixed cameras - No Indication
Features
· Optimal transmission performance
· Simple installation
· High impulse carrying capacity
· Stainless Steel Casing
· Optimal transmission performance
· Simple installation
· High impulse carrying capacity
· Stainless Steel Casing
Ranges Available
N-Type F-Type BNC CCTV Stud UHF TNC
• Male to Female, Female to Female connectors
• In line and Bulkhead mounting
Standard models provide protection up to 50W power level. Models for higher power levels are readily available on request.
N-Type F-Type BNC CCTV Stud UHF TNC
• Male to Female, Female to Female connectors
• In line and Bulkhead mounting
Standard models provide protection up to 50W power level. Models for higher power levels are readily available on request.
Product Description
The GATEKEEPER range of Coaxial Surge Protectors (GKCP) contain a high-speed gas filled surge arrestors which clamp the over voltage limiting the residual voltage for fast rise time transients. The use of low capacitance gas filled arrestors ensures operation at high frequencies with low insertion loss. The GKCP is available in either an inline or bulkhead configuration with the appropriate connectors on each end. The device is designed to minimise circuit capacitance and present a 50 or 75-ohm impedance so that performance up to 2.1 GHz is assured. Standard models provide protection up to 50W power level. Models for higher power levels are readily available on request.
The GATEKEEPER range of Coaxial Surge Protectors (GKCP) contain a high-speed gas filled surge arrestors which clamp the over voltage limiting the residual voltage for fast rise time transients. The use of low capacitance gas filled arrestors ensures operation at high frequencies with low insertion loss. The GKCP is available in either an inline or bulkhead configuration with the appropriate connectors on each end. The device is designed to minimise circuit capacitance and present a 50 or 75-ohm impedance so that performance up to 2.1 GHz is assured. Standard models provide protection up to 50W power level. Models for higher power levels are readily available on request.
Features
- Optimal transmission performance
- Simple installation
- High impulse carrying capacity
- Stainless Steel Casing
Installation
Connect the inline protector as close as possible to the equipment being protected. It is extremely important that the coaxial sheaths are earthed at the building point of entry. The preferred method of installation for the bulkhead models is at the point of entry of the building of the cable. The bulkhead mount allows a secure earth connection to the cable entry plate.
Connect the inline protector as close as possible to the equipment being protected. It is extremely important that the coaxial sheaths are earthed at the building point of entry. The preferred method of installation for the bulkhead models is at the point of entry of the building of the cable. The bulkhead mount allows a secure earth connection to the cable entry plate.
Data Sheet
