CPU UNITS - MPX28
MPX28 is a complete computer on a board smaller than a credit card.
|
GENERAL DESCRIPTION
The module includes a Freescale i.MX28.x a SDRAM, a Flash memory and up to two Ethernet PHY interfaces. The integrated LCD-controller enables direct connection of an LCD screen with touch-screen capability. On the MPX28 200pin SO-DIMM connector, are available a few interfaces as: • 2 CAN; • 1 USB ITG; • 1 USB Host; • 2 Ethernet interfaces; • 3 UART; • 2 I2C Bus; • 2 Serial Audio; • 1 four wires SD Card. OS Support: Linux 2.6.35.3 Development tools; · QT Creator · Open source Soft PLC based on IEC 61131-3 languages Applications: · Industrial Human Machine Interface · Operator panel · PLC · Handheld instruments · Component for automation system |
TECHNICAL CHARACTERISTICS
System On Module
· Processor: Freescale i.MX287, 454 MHz based on ARM926EJ-S
· RAM: 128MB DDR2-400 SDRAM
· ROM: 128MB NAND Flash
· Power supply Single 3.1V to 5.5V
· Size 33mm SO-DIMM format
· Temp.-Range 0°C..70°C
Key Features
· Two 10/100Mbps Ethernet ports with IEEE1588 support
· Two High-Speed USB 2.0 ports
· True colour LCD controller max resolution 800 x 480 pixels
· Two CAN interfaces
· 4/5 wire Touchscreen interface
· Several peripheral interfaces:
- UART, SD-CARD, I2C, PWM, Serial Audio, SPI
· Power management optimized for long battery life
· 3.3V I/O
System On Module
· Processor: Freescale i.MX287, 454 MHz based on ARM926EJ-S
· RAM: 128MB DDR2-400 SDRAM
· ROM: 128MB NAND Flash
· Power supply Single 3.1V to 5.5V
· Size 33mm SO-DIMM format
· Temp.-Range 0°C..70°C
Key Features
· Two 10/100Mbps Ethernet ports with IEEE1588 support
· Two High-Speed USB 2.0 ports
· True colour LCD controller max resolution 800 x 480 pixels
· Two CAN interfaces
· 4/5 wire Touchscreen interface
· Several peripheral interfaces:
- UART, SD-CARD, I2C, PWM, Serial Audio, SPI
· Power management optimized for long battery life
· 3.3V I/O