DALI/USB BRIDGE
The DALI/USB Bridge is a control and configuration device that connects a DALI bus with any computer equipped with a USB port. The DALI/USB Bridge allows for the setting of the operating parameters defined by the DALI standard and the operating parameters of iLumTech control devices. The small form factor and wiring simplicity of the DALI/USB Bridge makes it ideal for DALI bus setup and commissioning.
DALI/USB BRIDGE
DALI/USB BRIDGE |
DESCRIPTION |
KEY FEATURES |
|
TECHNICAL PARAMETERS |
|
INSTALLATION
DALI Input Unit detects short-circuit connection between wires Input 1-4 and COM. Each input of DALI Input Unit can be configured with different DALI address (device support broadcast, group addresses and short addresses), for each input can adjusted three types of reactions: Static commands, Direct level or Toggle.
In Static commands mode device transmit defined command each time a press is detected. The most useful commands are: MIN_LEVEL, MAX_ LEVEL, UP or DOWN. If desirable user can set up any command listed in DALI standard (IEC 62386-102).
In Direct level mode device transmit defined brightness level each time a press is detected (for example 50%).
In Toggle mode device toggles between two commands each time a press is detected. The user can choose from 3 toggle functions: MIN/MAX, ON/OFF and Scene X/ Scene Y. Scene X and Scene Y are settable number of DALI scenes which are toggled. The configuration can be changed using special programmer (on demand).
DALI Input Unit is a DALI powered device therefore external DALI power supply has to be connected on the DALI line.
In Static commands mode device transmit defined command each time a press is detected. The most useful commands are: MIN_LEVEL, MAX_ LEVEL, UP or DOWN. If desirable user can set up any command listed in DALI standard (IEC 62386-102).
In Direct level mode device transmit defined brightness level each time a press is detected (for example 50%).
In Toggle mode device toggles between two commands each time a press is detected. The user can choose from 3 toggle functions: MIN/MAX, ON/OFF and Scene X/ Scene Y. Scene X and Scene Y are settable number of DALI scenes which are toggled. The configuration can be changed using special programmer (on demand).
DALI Input Unit is a DALI powered device therefore external DALI power supply has to be connected on the DALI line.