FUEL & LUBE OIL TEST CABINET

 BESST Engineering provides portable oil test kits or the Test Cabinet for fuel and lube oil testing. Portable analysis equipment enables checking of oil on-site. The analysis gives useful information about the engine’s condition which in turn saves maintenance costs as degradation and malfunctions are recognized well in time. The portable oil test kit is easy to handle (even for untrained people). Transportation is easy too as the kit comes in a durable case. It contains all the necessary equipment to test oil condition. Results are fast and accurate. The kit is suitable for all heavy fuel oils.
 Water in Oil (WIO), Base Number (BN), Viscosity, Density, Salt, Insolubility and Compatibility can be measured with the portable oil test kit. This information helps to avoid damage to the engine as repair can be done while there is still time. 
The Fuel and Lube oil Test Cabinet can run up to 10 tests.
 The TEST CABINET is a portable laboratory and provides efficient and exact condition monitoring of fuel, lube and hydraulic oil in engines. Test results are available immediately and it is possible to make decisions regarding maintenance in time to avoid damages in the engine.

Click Here to Request a Quote

The following test equipment is in the basic version:
- V 150 SALT CHECK, V 5108 TWIN CHECK, V 310 SPOT CHECK
- V 232 VISCO DENS PLUS, V 200 VISCOSITY COMPARATOR,
- V 351 COMPATIBILITY CHECK 2005
Optional:
​- V 750 FLASH POINT CHECK und V 400 COOLY CHECK

Features:

• Parameters to measure:
  Water in Oil, Base Number, Viscosity, Density, Salt, Insoluble and Compatibility
• Water in Oil
• Measuring range: 0 – 1.0 vol.% H2O
• Measuring time: about 20 min
• Accuracy: +/- 3%
• Base Number
• Measuring range: 0 – 100 BN
• Measuring time: about 20 min
• Accuracy: +/- 1BN
• Viskosity-comparison
• Measuring range: go / no go
• Viscosity
• Measuring range: 1 – 999 mm²/s
• Measuring time: depends on the viscosity
• Density
• Measuring range: 0,82 – 1,05 g/ml
• Measuring time: about 15 min
• Sample Volume: 150 ml
• Accuracy: +/- 3%
• Saltwater-contamination
• Measuring time: about 10 min
• Insoluble-comparison
• Measuring time: about 15 min
• Compatibility
• Measuring range: all heavy fuel oils
• Measuring time: several hours
• Optional: Pour Point, Flash Point

Benefits:

• Saving of cost because malfunction is recognized in time and repairing could avoid damages
• Easy to learn procedures
• Prepared for wall fastening
• Lamp and work surface are installed
• It is possible to determine in a short time, if the oil change interval could be delayed or if it is necessary, to do this earlier than planned. Furthermore the test results shed light on, if repairing or maintenance should be done.