IRON CHECK - Chemical Iron Analysis
Order Code: T 140 - Chemical Iron Analysis
Referring to the significance of iron in cylinder drain oil, especially with regard to cylinder drain oil, Martechnic® has developed an easy to handle iron test. The method is based on a chemical reaction of two reagents with the iron present in its special state - corrosive and/or abrasive. Two samples are required.
Due to the chemical and not magnetic characteristic of this test it is possible to detect iron at an amount from 50 mg/l upwards. A variant, which is still under development, will focus especially on the range of 5 to 100 mg/l.
Referring to the significance of iron in cylinder drain oil, especially with regard to cylinder drain oil, Martechnic® has developed an easy to handle iron test. The method is based on a chemical reaction of two reagents with the iron present in its special state - corrosive and/or abrasive. Two samples are required.
Due to the chemical and not magnetic characteristic of this test it is possible to detect iron at an amount from 50 mg/l upwards. A variant, which is still under development, will focus especially on the range of 5 to 100 mg/l.
|
Features:
Measuring range:
|
|
As different states of oxidized iron require different chemical treatments, the method is divided into two parts: The determination of total iron as result of mechanical friction and corrosion, and the determination of corroded iron caused by acid attack alone. The test method has been applied for patent under application number 14 002 749.1.