MPT60 M1

Thermoregulator in a 48x48 box with single display for J, K, S, and PT100. Output PID or ON-OFF control with relay output. Optional 1 relay alarm output.

GENERAL DESCRIPTION
The MPT60 M1 instrument model is a "single loop" temperature controller in a 48x48 container with the possibility servomotor control drive. The MPT50 has an interface with thermoresistors, thermocouplings and analogue inputs. 
The management software allows instrument set-up directly from the key-board; the control is by PID/ON-OFF together with "soft-start" and "self-tuning" functions for automatic acquisition of the control parameters. 
The instrument may be ordered with the following options:
- Tension and/or current output for motorized valve control or read-out output
- Remote second setpoint selection

Download MPT60 M1 Series User Manual - http://www.mect.it/dati/file/prodotti/64_MPT60%20M1_EN.pdf

TECHNICAL CHARACTERISTICS
Thermal stability: 50ppm/°C
Accuracy better than: 0.5%
Inputs: tc J, K,S; RTD Pt100; 0÷20mA; 4÷20mA; 0÷10V
Controls: PID, ON-OFF
Cold junction compensation: automatic
Max load for current output: 300Ω
Min. load for voltage output: 1KΩ
Load. input 4÷20mA: 5Ω
Load. input 0÷10V: 1MΩ
Relay output for alarms: 5A / 250Vac
Relay output for main control: 5A/250 Vac (10A/250V if G option)
Power supply: 25Vac 50÷60Hz | 115Vac 50÷60Hz | 230Vac 50÷60Hz | Vcc or Vpt (12÷30Vdc)
Power absorption: 2W
Max working temperature: 50 °C
Height digits: 8 mm (red)
Dimensions: 48x48 (96 mm depth)
Mounting plate: 45,5 mm (h) x 45,5 mm (l)
Weight: 200 gr.

OPTIONS AND SERIAL OUTPUTS
Position 1:
A: Main relay output
C: Main static output
F: Exchange relay output for main control (5A)
G: Exchange relay output for main control (10A)

Position 2:
03: 1 alarm only with option A or C (servomotor control drive possibility)

Position 3:
OAP: Analogue outputs for motor valve control or read-out
RSP: Remote setpoint