MPT91 M1​

Thermoregulator in a 48x48 box with two display for 4÷20mA, 0÷20mA, 0÷10V, J, K, S, and PT100.  Output PID or ON-OFF control with relay output.
​Optional 1 alarm relay output, analogue output and serial outputs.​

GENERAL DESCRIPTION
The MPT91 M1 instrument model is a "single loop" temperature controller in a 48x48 container with the possibility to execute 3 programs of 8 steps each and servomotor control drive. 
The MPT has an interface with thermoresistors and thermocouplings and analog inputs. 
The management software allows instrument set-up directly from thekey-board; the control is by PID/ON-OFF together with "soft-start" and "self-tuning" functions for automatic acquisition of the control parameters.
The instrument may be ordered with the following options: 
- Bi-directional serial outputs with opto isolation (RS485 half duplex: ASCII and MODBUS protocols)
- Tension and/or current output for motorized valve control or read-out output
- Remote second setpoint selection.

Download MPT91 M1 Series User Manual - http://www.mect.it/dati/file/prodotti/66_MPT91%20M1_EN.pdf

TECHNICAL CHARACTERISTICS
Thermal stability: 50ppm/°C
Accuracy better than : 0.5%
Inputs: tc J, K,S; RTD Pt100; 0÷20mA; 4÷20mA; 0÷10V
Controls: PID, ON-OFF
Cold junction compensation: automatic
Analogue outputs features:
Outputs: 4÷20mA - 0÷20mA - 0÷10V
Max load for current output: 300Ω
Min. load for voltage output: 1KΩ
Resolution: 12 bit
Load. input 4÷20mA: 5Ω
Load. input 0÷10V: 1MΩ
Relay output for alarms: 5A / 250Vac
Relay output for main control: 5A / 250 Vac
Power supply: 20÷30Vac/Vdc , 90÷260Vac/Vdc
Power absorption: 5 W
Max working temperature: 50 °C
Height digits: 8 mm read out (red) - 8mm set point (green)
Dimensions: 48x48 (96mm depth)
Mounting plate: 45,5 mm (h) x 45,5 mm (l)
Weight: 150 gr.

OPTIONS AND SERIAL OUTPUTS
Position 1:
A: Main relay output
C: Main static output
F: Exchange relay output for main control (5A)

Position 2:
03: 1 alarm only with option A or C (servomotor control drive possibility)

Position 3:
OAP: Analogue outputs for motor valve control or read-out (if serial outputs is not request)
RSP: Remote setpoint (if serial outputs is not request)

Cod. 12: RS 422 optoisolated bi-directional
Cod. 13: RS 485 optoisolated bi-directional
Cod. 14: RS 232 optoisolated bi-directional