SAMPLING KIT
Order Code: SAM 007 - Quick Sample taking
The Sampling Kit from Martechnic® enables the taking of a sample of fuel, lube and hydraulic oil with a tube which is fixed to a telescope rod. By using the vacuum pump which is coupled with an adapter at a sample bottle, it is possible to suck the oil sample out of the tank from top, middle and bottom.
The Sampling Kit from Martechnic® enables the taking of a sample of fuel, lube and hydraulic oil with a tube which is fixed to a telescope rod. By using the vacuum pump which is coupled with an adapter at a sample bottle, it is possible to suck the oil sample out of the tank from top, middle and bottom.
Features:
- Provides an indication of free water in the oil tank
- Operating time: about 2 minutes
- The sample bottles are suitable for water, emulsions and low viscous mineral oils up to a viscosity of 1200 mm²/s at 20°C.
- Adhering iron filings at the magnetic head of the telescope rod could be an indication of friction
- Easy to handle also for untrained personnel
- Quick detection of free water in oil tanks
With the included detection past it is possible to prove if free water is in the tank directly. The paste has to be coasted on the telescope rod, before dipping it for up to 90 cm into the oil. If the past changes colour within 30 seconds to red, there is free water in the oil. If the paste doesn't change colour, a water-in-oil test with WIO CHECK could be done to determine if saturated or emulsified water is in the oil.