UPS500 POWER SUPPLY
UPS500 is a switch mode power supply with backup battery pack, designed and developed for use on all Nethix's remote monitoring and control devices. UPS500 has been developed as a complementary product for WE500. Besides its main switch mode power supply functionality, UPS500 can also detect the status of the network and of the internal battery pack.
Network and battery charge status
Through the two available outputs, UPS500 can detect network or battery power outages and send a signal toWE500 that, in turn, informs one or more selected users and power-off WE500 safely, to avoid uncontrolled switch-offs.
Easy to install
Suitable to be DIN-BAR mounted (according to EN60715), UPS500 is complete with electronic thermal protection and secured against short circuits. It includes 2 LEDs for signaling the presence of output tension and the battery-charge status.
Input voltage range (nominal) : 195-265 Vac / 50 Hz
Output voltage (nominal): 17 VDC
Output current (nominal): 1.5 A
Power: 24 W
Output regulation: +/-4%
Frequency: 100 KHz
Isolation: 3000 Vac
Set of 10 NiMh 2200 Mah batteries
Photo Isolated output for signaling the network presence (220 Vac)
Photo isolated output for signaling battery low tension
Operational temperature: -10°C / +50°C
Storage temperature: -25°C / +85°C
Humidity: 90% non condensing
Cooling system: by natural convection
Protection: electronic (short-circuit, overload and thermal)
CE certification: EN60715, EN60950, EN50081-1, EN5081-2, EN5022, EN55024
Enclosure: DIN-BAR mountable dark gray plastic enclosure