XP100
XP100 series includes a whole range of I/O expansion modules ready to use with Nethix GSM/GPRSremote control devices and as general remote I/O devices.
XP100 devices communicate with the host through aModbus® RTU compatible protocol over a multipoint two-wire RS485 serial channel.
XP100 devices communicate with the host through aModbus® RTU compatible protocol over a multipoint two-wire RS485 serial channel.
|
XP100 range includes:
Digital I/O expansion 6-Inputs 6-Outputs - With 6 isolated digital inputs (PNP/NPN) and 6 relay output Digital I/O expansion 16-Inputs - With 16 isolated digital inputs (PNP/NPN) Analog I/O expansion 4-Inputs 4-Outputs - With 4 analog inputs (0-5V/0-10V/4-20mA) and 4 analog outputs (0-5V/0-10V/4-20mA) Analog I/O expansion 4-Temps – With 4 temperature inputs (NTC, PT100, KTY81) |
|
General Characteristics |
Power supply: 9-32VDC 12-24VAC Current consumption (average): 100mA @ 24VDC, 200mA @ 12VDC Weight: 180 gSize: 90x70x65 mm Operating temperature: -15°C +55°C Communication: RS485 - two wiresProtocol: Modbus RTU Communication parameters: 9600Baud, N, 8, 1 Protection: transient suppression on RS485 line |
XP100 16DI |
Input: 16 Max voltage: 24 VDC Isolation: 2500V Response time: 10 ms |
XP100 6DI/6DO |
Input: 6 Max voltage: 24 VDC Output: 6 Relè: AC 1A @ 125V, DC 1A @ 24V Isolation: 2500V Response time: 10 ms |
XP100 4AI-4AO |
Input: 4 Max voltage: 24 VDC Type: 0-5V / 0-10V / 4-20mA T. sampling: 0.1 s N. Bit: 10 Output: 4 Type: 0-5V / 0-10V / 4-20mA Bandwidth: 10Hz. |
XP100 4T |
DIN mountable plastic case Size: 45 x 120 x 100 mm Weight: ~350gr Antenna connector: SMA |